Tag Archives: Clipping Path service

How to decide a perfect background for product photography?

The first impression makes a lot of difference in the online market. Sales, growth, profitability, and every other thing depend on what customers see and get attracted to. To attract customers, images play the most significant role. Images are that vital part of the online business which helps in gaining the attention of the customers. Therefore, it is important for the images to be eye-catching. Images help the customers in the evaluation of the product, compare it with different options and then make a purchasing decision. Use of good images increases the credibility of the seller as well as demonstrates the product in a suitable manner.

While shooting product images, most of the time, the background is a factor which is overlooked and not given much importance. But as a matter of fact, the background can make or break the final outcome of the overall image. The background can make both positive and negative impact on customers. While searching for products, neither of the customers is interested in bright and pop color background which steals the attention instead of the actual product.

For any image, it is important for the product to be the focal point. In order to get a fit background, one must keep in mind the following points

Avoid using a busy backgroundavoid-busy-background

A background is the largest element of an image and use of a busy background will divert the attention from product to the background which is not helpful for the sellers. A busy background with a lot of elements in it is most of the time not suitable for a product image. One must also abstain from using a background with busy details as everyone is interested in seeing more of what they are searching for.

Use subtle colorsuse-subtle-colors

Bright colors look very unpleasing when you are searching for a product. Therefore, it is advised to use subtle colors for the background of product images because bright backgrounds are recommended for advertisements & banners not for a product image as I think you already visited the Apple’s website once in your life, right?

The background color has it’s great importance as it helps in making the product more visible out of the entire image. Some background colors go perfectly matched with the product, whereas some create blunders.

The light colored background is preferred for most of the product images but there are certain guidelines for images in different cases. In each case, a different color should be used as background. Also, a lot of online marketplaces have their own set of guidelines for a product image and the background color must be selected accordingly. However, for marketplaces, who do not have any guidelines, here is a guide for selecting an appropriate background color.

White backgroundwhite-background-min

The White background is preferred for almost all product images. It has a lot of reasons behind it. White is the most subtle and neutral color which has the very low impact on the image. Therefore, it is chosen as the background Other than that, the white background is timeless and never goes out of the trend or look dull. Even though being lightest amongst all shades, white has its own charm which brings the best out of the image. Also, a white background makes the image look more product-centric and the product gets highlighted instead of the unwanted background. Specifically for glass products, a white background is used.

Grey backgroundgrey-background-min

Grey, specifically its lighter shade is also equally fitting for product image background as it is not too loud and does not steal the attention from the actual product. It’s another color in the neutral family. Product images look most appealing when they have a light background color such as white and grey. Grey color of the background is also used as a substitute of white color. Where the online marketplace uses white color as the page background, grey is used as the background color for product images to distinguish the page area from an image. Product images go well with the grey background, fulfilling the purpose of highlighting the product and not appearing bright at the same time. Grey color is most preferred in the fashion stores & for 3D mannequin product images.

Black backgroundblack-background-min

The black color is although the darkest shade and may attract a lot of attention towards it at the first sight, but for some products, black color is the best choice. In case of jewelry, black background makes a lot of difference by making the diamonds and other metals shine brighter, resulting in a presentable and attractive product image.

Texture backgroundtexture-background-min

For those who may not want a plain background, yet want to remain on the basic side can choose simple and elegant textures such as marble texture, grid & gradient shades or any other texture to add a creative element to the product image.

Wooden floorwooden-background-min

For furniture items such as table, chairs, the background does not play an important role, but floor matters a lot. In such cases, the wooden floor is recommended to amplify the product image because it gives an idea of how the product will look in the real world.

Removing the background and inserting suitable one with apt color is a challenging task. Either you can DIY or let ClippingPathUnited do this for you.

Do you know multi layer clipping path process in Photoshop?

As we all know that the basic clipping path is to remove the background of an image from its object. This is one layer clipping path process. But there is also multi-layer clipping path process for many complex product or model images. An image which is having multiple objects is needed to work in multiple layers. Once you are done with having one vector path, you can convert them into multiple layers.

This slideshow requires JavaScript.

If you have more than one object in the image, you need to do multiple paths in multiple layers, so that each object can get their specific shape. These things happen mostly when you want to remove the background of a complex or super complex image. Multi-layer clipping path helps to showcase the masked areas in a very good way. Each and every object of every layer would be refined without losing their shapes.

Every kind of objects you can do path with a multi-layer path. Here are some products which mostly go for multi-layer clipping path

1.Bicycle

2. Neckpiece (Jewelry)

3. Garment products (mostly hoodies)

4. Furnishes

5. Gift Items

Multi-layer clipping path is usually taken by photographers and e-commerce websites because they need their photographs to be the best.

Photoshop How-To: New Tri-Range Frequency Separation Action

Whether you believe that the approach is obsolete, amazing, or simply useful, the frequency divide still persists in the photography industry and has been for many years. Here’s how I used a new method that increases control over all three main categories: High, Mids, and Chimes.
Trying to break the frequency and the true methods have been used for years, it is lightweight, controversial. If you have spent any real time through the frequency separation in your finishing, then you have probably determined what you like and do not like about the method, and you probably want to remove those limits Has developed simple tasks around the techniques that you constantly encounter. To me, the opposite was a common issue, so I discussed it so that I can make it easier for me on the contrary (especially when working in a hurry under the time limit stress). So when it is arrogant to think that I have created a super useful and fresh way to separate the frequency, I will let you become a judge

Wait, What’s Frequency Separation Again?
But before that, we normally refresh ourselves when the frequency Separation. Speaking roughly, there are two different ways to differentiate the frequency:

Modify the high and low-frequency layers directly, clean the scars on the high and smoothen the color transition on the following
To paint the skin color to smooth the infection, use empty layers between high and low-frequency layers (this method assumes that you have completed your dexterity with treatment and burnt before the frequency separates is.
I use the latter method almost exclusively, I think it gives me more control in general, and since I dodge and burn my theory as a technique to prove the skin, then the frequency is different. Is the last polish that can be used only when needed

If you have read this point, but so far the frequency is not the remote idea of separation, then for many explanations and approaches about it sneak a peek at Fstoppers.

I’m a control bizarre, so what’s next?
But what about more control? A few weeks before the amortization a couple of weeks ago, I was thinking that I can control my frequency differently “painting” more accurately and quickly. After some experimentation, I decided that a decent aspect to control would be three big categories: low, mid and high. After a few minutes, I prepared a three-row masking action for Photoshop (free download link), allowing you to control the total mask control of the painting work, which separates your frequency divided into three main categories in the photo frequency. is. For a six-minute explanation, check out the video above to see how I use it occasionally. Please keep in mind, this action is hardly a master solution of all things, so use it to see if you can get results together and ultimately decide what is best to use in your workflow (if absolutely).

This action is the perfect complement to Photoshop for my Freakscape control plug-in, but you can be reprogrammed to work with any frequency separation setup already used.

Download the Action here.

Clipping Path service

We have Clipped Path on digital photos. In the picture industry, high-quality photo task needs high-quality Clipping Path work, which is also called outline, knock-out, silo, masking…..etc.New05

 

We have a Clipped path with high quality, maiden turnaround time, and at the low rate. We do Clipping Path every day! If you are a graphic designer tasking for catalogs, books, web design, brochures, logos we can help. You do the creative task, let us do this tedious job for you!

We are a flexible, low-expense and the hard-working service team to assist graphic designers path-masking method in graphic design and catalog masking projects. Our rate is based on $15 per hour tasking wages. No rush fee! Every photo is unique, please contact our free quote.

Our team is trained to support you and supply the worry-free hand-drawn path work on digital photos. Our business has more than 8 years experience focusing on Clipping Path and we have completed tens of thousands of all type photos, from complex jewelry, models, industrial, furniture, large helicopters…. to native United feather decorations, electric fans, brushes, line arts, bicycles, cars, hairs……..  it!

We are confident about our quality and maiden pace service. Many of our customers give our product shots late afternoon for even call us at night, we will give the Clipping Path back to them the next day. Our clients are amazed by our task, the highest quality, and fastest turnaround as always!

You send our digital photos and our paths for you. It is just that simple! Both mark and PC files are welcome and we have our FTP server to help your digital0 picture transmission.

Download our path samples and open by Photoshop@ to check our quality. Contact us for our unbelievable low rate!

If you cannot find the information you need on our website, please contact us together with your questions or comments. Our Customer Service Representatives are ready to assist you.

 

Photoshop Clipping Path & Photo Cut Out Service tips

What is Clipping Path?

Clipping Path is a closed vector path, or shape, usually withdraw with a Photoshop pen tool to cut out a photo of it is background. When Clipping path is included and everything outside the vanishes. Use of Clipping Path in the image gallery has increased dramatically in the previous few years. Cause the result of cutting out an image from a background using Photoshop clipping path is the ever better process in terms of quality. There may have some other option in Photoshop to drop out the background, but they are not used while considering best quality output. A Clipping Path not only can be applied to the kind of photo that had the proper edge, it can also be applied to the smooth edges.New13background-remove

Compound Clipping Path

In the photo industry, a Compound Path result from the combination of multiple paths for various products, or various colors within a single photo. It is normally used for color correction and background fall down purposes.

How we draw the Path

To ensure quality Clipping Path, Clipping Path United draws all paths manually using only Photoshop pen task. Once drawing a path is finished with an image, we apply clipping path on it so that when you zone it in your layout, e.g. in InDesign, it will show only the portion which had inside the path. Everything outside will have vanished and you can use whatever background color you want. We also give you photos in PSD or TIFF format with a separate transparent background layer if you badly need so.

Who needs Clipping Path service?

In today’s world, many individuals and factories need Clipping Path service. Specially who are involved in photography, advertising, designing and printing industries. For example, a catalog company usually uses hundreds of photos in their catalog and they are most likely to remove that background of their product images before they place them into the layout.

Similarly, a web development company needs to publish images on the website where they need to use clipping Path to fall out the background. We are closely working together with individual photographers, catalog company, graphic design houses, web developers, photo studios, magazine companies, newspapers, printing press, advertising agency, etc.

How we guarantee 100% accuracy Clipping Path

With Clipping Path United, all DTP professionals are trained in Photoshop and illustrator, basically in Clipping Path & masking and have several years of work experience in the field. Most of our designers also studied at the Graphic Arts Institute, the only government organization in Bangladesh that teaches printing technology and graphic design. They who are clipping Path job only; for example, we do not get them involved in the other site like retouching or editing to ensure that they are more qualified at what they are doing, To ensure keep our quality always at the top, we do not employ any new designer who did not have any work experience in the past and or any best training. Since we are expanding our business, we have a training institute where a group of enough, we get him involved in the production. We also have the triple checked quality control system. Maiden of all, we have got team leaders who look after the DTP professionals on how they are working, whether or not they are on the correct path. Upon completion, we have a quality controller who checks all photo one by one and finally goes to DTP in-charge who check for the final time uploading to the client.